Mobile Hydrogen Leak Locator 9012XRS

Ground Probe 8212 is designed to work in the most demanding conditions together with Hydrogen Leak Detector 9012 XRS from adixen. The 8212 is a practical probe for leak detection in wet or muddy environments, such as soft soil, clay, sand and snow. The sensor is located at the tip of the rod and is simply stuck into the ground to detect Hydrogen tracer gas.

Technical specification:

• Sensitivity: 1 ppm H₂ in air
• Response time: < 1 sec.
• Heat up time: < 10 sec.
• Operating temperature: -20°C – +50°C

Surface Probe 8612 is designed for locating leaks in buried cables, pipes and tanks. The probe is used together with Hydrogen Leak Detector 9012 XRS from adixen.

Advantages:

• Detects Hydrogen gas under ground and in floors
• Built-in Hydrogen sensor
• Two-speed vacuum pump
• Rechargable battery

Technical specifications:

• Pump capacity: 0,5 (1,0*) l/min
• 200 (450*) mbar
• Response time: 3 sec. (1 sec.*)
• Battery: Maintenance-free Pb
• Battery capacity: 20 (3*) h. above 0°C / 10 (1*) h. below 0°C
• Operating temperature: -20°C to +50°C
• Weight: 2 kg

(*) at high pumping speed

Duct Probe 8712 is designed for locating pneumatic leaks in ducted telephone cables. It is yet another useful accessory to the adixen Hydrogen Leak Detector 9012 XRS.

Advantages

• Detects Hydrogen gas in ducts.
• The most sensitive and straight-forward device ever for locating leaks in ducted cables.
• Brings time down for pin pointing a leak from hours to minutes.
• Integrated sensor, cable, & rod.
• 11 mm G.R.P. rod - strong and flexible.
• Friction brake.

Technical specifications

• Rod length: 100 m
• Rod diameter: 11 mm
• Rod material: Glass fibre reinforced polyester coated with HD polyethylene
• Probe tip diameter: 12 mm
• Response time: < 1 sec.
• Reel diameter: 0.8 m
• Total weight: 28 kg
• Operating temperature: -20°C – +50°C