Workstation Helium Leak Detector ASM 1002

The ASM 1002 offers a unique vacuum module - 25 m³/h - (up to 50 m³/h) roughing pump associated with a dedicated hybrid turbo pump (200 l/s) that delivers ultra fast cycle time. Sturdy design and low maintenance components, the ASM 1002 is an ideal production tool.

The unique ergonomics of the ASM 1002 allows the operator to be seating comfortably while leak testing parts. There is plenty of leg room underneath the working table for the operator removing the usual burden of standing (or sitted with the body twisted) in front of a leak detector while leak testing for hours.

Key Points

• Fastest unit of its category
• User friendly and comfortable
• High sensitivity equipment
• Rugged and reliable
• Versatile

Two solutions in one unit thanks to 2 softwares:

1 - Sealed packages leak test software:

The ASM 1002 can achieve 1 · 10^-9 mbar · l/s, leak testing sealed packages in less than 4 seconds (single or batch testing), which makes it the fastest unit of its category on the market.

The ASM 1002 is fully automated. As soon as the test chamber is closed, the cycle starts automatically. The powerful pumping package evacuates the test chamber and allows the unit to perform the leak tests fast and accurately. At the end of the test, the ASM 1002 will display a Pass/Fail (Green/Red indicators) response to the operator.

For a good part, the test chamber will vent back to atmosphere and will open automatically, optimizing the operator time.

For a leaking part, the red (fail) indicator will go off. The test chamber will remain under vacuum requesting the operator intervention to vent it back to atmosphere via a push button. This removes any interpretation out of the operator and guarantees the capture of all leaking parts.

2 - Open packages leak test software:

The software will keep the unit in test mode as long as needed to allow the operator to perform the leak test. The end of the test will be triggered by the operator.

The test chamber can be easily removed and any fixture can then be installed to facilitate the leak test of any size hybrid circuits for instance.